Control panel & power cabinet design and making

-
Control panel cabinet using and making

 The control panel cabinet is to assemble the switchgear, measuring instrument, protective appliance and auxiliary equipment in the closed or semi-closed metal cabinet or on the screen according to the electrical wiring requirements. The arrangement should meet the requirements of the normal operation of the power system, which is convenient for maintenance and does not endanger the person. And the safety of the surrounding equipment. In normal operation, the circuit can be switched on or off with the aid of a manual or automatic switch. In the event of malfunction or abnormal operation, the circuit or alarm is cut off by means of a protective device. The measuring instrument can display various parameters during operation, and can also adjust some electrical parameters to prompt or signal the deviation from the normal working state. Commonly used in various hair, distribution, and substation.
Control panel caibnet full frame, side panels, front panel and rear doors, top cover and bottom panels of the cabinet can be removed, which can adapt to various requirements and facilitate installation and maintenance.

Electric control cabinet also includes many kinds of electrical control cabinets, frequency control cabinets, low voltage control cabinets, high voltage control cabinets, water pump control cabinets, power control cabinets, explosion control cabinets, elevator control cabinets, PLC control cabinets, fire control cabinets, brick machines. Control cabinets and more.

ABB Cabinet frame making solution. There are many metal frame and profile steel in a control cabinet, such as upright pole and connect beam.
Cabinet profiles drawing should be issue first.

Shenzhen Superda Machine CO., Ltd engineer as per issued profiles drawing or sample to desing roll forming machine technology parameter, such as roller station, roller shape, roller material and process, machine running power etc technology requirement. 
Formed cabinet steel profile installation overview.


 Power cabinet frame profiles drawing design



 Superda engineer as per user offer sample or draft drawing making machine process.

YX25-50  Cabinet Profile Roll Forming Machine

一、Technical parameters
No.
ITEM
PARAMETER
REMARK
1
MATERIAL
Type


T.(mm)
1.6-2.0mm

Yield Strength (Mpa)
G300

2
Forming product Width
50mm

3
Forming speed (m/min)

Including hole
4
Forming main power (KW)
7.5 KW
FYR
5
Hydraulic power (KW)
18.5 KW
FYR
6
Voltage
 AC415V，50Hz，3P


Cabinet profile steel making machine process
2 in 1 Uncoiler Straightening→servo feeder→Hydraulic press breach device  → Guide device → roll forming machine→shear device (including knife)→ finished product rack





评论

发表评论

此博客中的热门博文

Solar photovoltaic (pv) panel structure support system technology

-
图片
Solar photovoltaic (pv) panel structure support system The solar pv panel structure system is a special bracket for the placement, installation and fixing of solar panels in solar photovoltaic power generation systems. The general materials are aluminum alloy, carbon steel and stainless steel. Pile concrete solar PV ground structure solar panel system The solar support system related products are made of carbon steel and stainless steel. The surface of the carbon steel is hot-dip galvanized. It will not rust for 30 years in outdoor use. The solar photovoltaic support system features no soldering, no drilling, 100% adjustable, and 100% reusable. Roof mounting solar energy system The world energy crisis has promoted the rapid development of the new energy industry, and solar energy is the most important basic energy source of all kinds of renewable energy; therefore, it is a solar power generation technology that converts solar radiation energy into electrical ene...
阅读全文

Roller equipment for production electronic cabinet enclosure

-
图片
Roller equipment for production electronic cabinet enclosure The electrical cabinet is made of steel and is used to protect the components from working properly. Electrical cabinet manufacturing materials are generally divided into two types: hot rolled steel sheets and cold rolled steel sheets. The cold-rolled steel sheet is softer than the hot-rolled steel sheet and is more suitable for the production of electrical cabinets. Electrical cabinets are widely used in the chemical industry, environmental protection industry, power system, metallurgical system, industry, nuclear power industry, fire safety monitoring, transportation industry and so on. Cold rolled steel sheet roll forming machine process electronic cabinet for distribution box enclosure, low voltage cabinet frame, electrical switch board instruments.
阅读全文

Roll former for bank safe box

-
图片
In addition to safes for banks, there are also safes for anti-theft, fire, anti-magnetic, household, commercial, hotel, firearms, documents, etc. Due to its special function - furniture and anti-theft, safes should pay special attention when choosing. To purchase safes, you can basically consider the following aspects: 1) Steel plate material selection: It is distinguished from the thickness, material, and production area of the steel plate. These relate to the ability of the safe to withstand damage caused by special tools such as electric drills and cutting. 2) Forming and welding: Check whether the cabinet is formed in safe roll forming machine production line, check the gap between the cabinet door and the door frame, whether the switch is flexible, and the anti-smash function is weakened when the gap is too large. For the fireproof safe, the excessive gap is never Allowed.
阅读全文